A Productive Rant About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and may even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case you'll need to find some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

If you're planning to attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor, where they could be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will prevent drafts and water from getting into your home until a professional arrives to fix the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap between the door and the window is substantial, you may need to consider security screens that has a window. This will give you the best of both.

2. Sagging

upvc window repairs windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. In time, they could develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts or even security. It is crucial to act when you discover that your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to unblock the windows so you can access the frame. After that, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for fit. If you're satisfied with the fit of the window, you can tighten screws to keep them in the right position.

If you can't reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles can also loosen up. Most often it is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to shut the window and then perform a test fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's crucial to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris inside them and that the sill pan is properly angled to drain away from the window. In more serious cases, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze, it may be the hinges that are at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help you to hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should open.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by improper installation in the factory. Sending us a picture via our website will often solve the issue. We are more than happy to give advice.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc Window repair windows can be caused by a few various factors. The hinges can also become disaligned as a result of wear, causing gaps between the frame and sash. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock may also become unbalanced. It is located on the hinge side and could require to be cleaned. In some instances, it may be necessary to replace the hinges.

The next common cause of draughts is the window seals. These can become worn down or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will reduce the possibility of draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some sort of filler and can be positioned on the windowsill on top. They can keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it may be cheaper to replace them instead of fixing them. If you are experiencing issues with your Upvc window, it's best to consult a professional as soon as possible.