The 10 Scariest Things About Repairs To Upvc Windows

Repairs to uPVC Windows

upvc window repair is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and may even be fatal. It is essential to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the old frame very easily. However If you have double-pane windows that are anchored by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall onto the cloth instead of onto the floor where they can be trampled on and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is large, you may want to consider using a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. Over time, they can be affected by a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action as soon as you realize that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to unblock the windows to access the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you are happy with the size of the window, tighten the screws to hold them in place.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loose their elasticity. It is important to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. Most often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. Again this can easily be corrected by an uPVC Window Repair specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with ease it could be hinges at fault. They can be easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change a window hinge however it is simpler if you have someone to help you hold the frame.

Check that the uPVC hinges open and close in the right direction. You can check this by checking for the arrows on each hinge. This shows which way the window should open.

The problem can be caused due to opening the window in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a picture via our website and we will be more than happy to give you suggestions.

It is also essential to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become misaligned due to wear, causing gaps where the sash meets frame. This can be easily fixed by giving them a good clean, but if they are beyond repair it might be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window and can also be misaligned, and again it's feasible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and there may come an point at which it is more efficient to replace them than fix them. If you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as you can.